TEHCMs, which are found in all GM 6-speed automatic transmissions, can be flashed at your facility using the ACDelco TIS2Web program and a J2534 interface tool, making it even easier to earn customers’ trust. New TEHCMs integrate electronic and hydraulic components into a single module and are backed by a 12-month/12,000-mile limited warranty.

We’re going to do a transmission control module programming with the new gm system- SP2. Let’s get started. Go to ACDelco.com. once you put your subscription you go to review- Admin. the system is a little bit slower than the other one. so if you have not downloaded the Techline Connect yet. you will have to download it from here.

New GM transmission control module programming with TECHLINE CONNECT SPS2 (new software)

Apr 19, 2025 · Reprogramming the Powertrain Control Module (PCM) in a GM vehicle can resolve performance issues, update software, or fix error codes. Whether you're using a GM Tech 2, …

Sep 16, 2022 · The universal solution to reprogramming a transmission control module is to disconnect the battery terminals and let the system drain for 5-30 minutes. When you reconnect the battery, the TCM should be reset.

When programming a Transmission Control Module on the Equinox, you will need to get the programming calibration number from the original module before programming the new module. SPS (GM's Program) will ask for this number before prompted to program. If you have a Tech2Win then you should be able to check the part number that's in the old module.

How to Program a Single Module Using either the “Pass-Thru” or the “Go-Between” Method: https://obd2trade.com/gm-tech2-pass-through-or-go-between-method-to-program-a-module-2/

On the SPS Supported Controllers screen, select BCM Body Control Module – programming and follow the on-screen instructions. Key Ignition System: key in the ignition and any additional keys must be away from the vehicle at least 3 meters.

The two TPU inputs that the CANdi module requires are TPU12 and TPU15, which enable the module and detect its presence. If TPU12 and 15 do not appear on the screen, then they are defective in the VCI module and the VCI is failing to properly enable the CANdi module.

We’re going to do a transmission control module programming with the new gm system- SP2. Let’s get started. Go to ACDelco.com. once you put your subscription you go to review- Admin. the system is a little bit slower than the other one. so if you have not downloaded the Techline Connect yet. you will have to download it from here.