Bottom support type: In bottom support spring, the pipe is resting on the top of the spring load plate, as shown. This type of spring support is also known as ‘CAN’ Type or ‘F’ Type spring. Hanger type or bottom support type is selected based on …

In addition to our standard (hot-dipped galvanized, neoprene lined springs) variable spring supports, we can customize any material, finish, dimension, load, load adjustment, travel, travel stops, as well as providing sensors for remote monitoring.

May 31, 2023 · Selection of an appropriate spring support involves selecting the correct hanger type, series and size, and depends on several factors which includes: the piping arrangement; the location of support structure with respect to the pipe; headroom or bottom clearances available; the thermal movement of pipe; the load to be supported under operating ...

Spring Hangers – often referred to as Spring Supports or Flexible Supports – use helical coil (s) to accommodate vertical loads and movements of piping systems due to thermal expansions, seismic activity or rotating equipment.

Spring Hanger supports are basically mechanical resilient devices with a casing/housing that has a helical spring inside it that is pre-compressed during installation. While in operating condition, the inside spring is further compressed or expands depending on the pipe movement.

Securely weld or bolt the bottom of spring to the structure. For Type D, pass the hanger rod assembly through load column and attach it with a washer and hex nut to hold hanger rod in position. Attach the clamp on the rod assembly to support the pipe. Perform hydro testing if …

Find reliable and adjustable pipe support with Carpenter & Paterson's variable spring supports. Our solutions provide secure and flexible support for pipes of all sizes and configurations. Benefit from our industry-leading expertise, ensuring durable, precise, and easy installation.

Selection of Spring Hanger Supports is a very important activity for each piping stress engineer. This article explains the philosophy and steps required for a proper type of spring hanger selection.

In this section, you will find our standard variable and constant pipe supports. Variables use coiled springs to support a load and allow movement. The resistance of the coil to a load changes during compression, which is why these devices are called “variables”.

Spring hangers and supports carry forces from the pipe support to the load-bearing structure over a specific travel range. The hangers/ supports are set to the required load at the factory (fitting unblocked devices is not recommended).