LILYGO T-Embed SI4732 is an ESP32-S3 development board with an AM/FM radio, a TFT display, a rotary encoder, a built-in ...

The YD-ESP32-S3 is an entry-level development board equipped with a 2.4GHz WiFi 802.11 b/g/n + Bluetooth® LE module ESP32-S3-WROOM-1. Most of the pins of the modules on the board have been lead out to ...

The ESP32 Development Board has multiple variants. You can use any one, but GPIO pin positions may differ, so ensure you are using the correct ones. Similarly, for the MPU6050 module ... ambient light ...

INT - Interrupt Pin. GND - Ground Connection ... connected the PMW3901 motion sensor with the ESP32, let’s look at the code. To start with, make sure the ESP32 board manager is installed and the ESP32 ...

The Waveshare ESP32-P4-Nano is a tiny, inexpensive, low-power development board powered by ... Power over Ethernet (PoE) module, and a 10.1 inch, 1280 x 800 pixel capacitive touchscreen IPS ...

The proposed setup aims to evaluate the feasibility of utilising an electrode-based E201 BNC pH measurement sensor for assessing ... modes and power consumption of the ESP32 chip. Fig. 4: The pin ...

In the current century, everything is being shifted to WiFi. There are a lot of Weather stations available in the market that can are operated on WiFi and can be used in homes. These weather stations ...

I got Error messages like below: & was unexpected at this time. exit status 1 Error compiling for board ESP32 Dev Module. after I installed ESP32 Board manager for ...

5V and GND pin headers 3V3 and GND pin headers Dimensions – 51.8 x 25.5 mm ESP32-C6-DevKitC-1 pinout diagram The new ESP32-C6 module and development board work with the ESP-IDF v5.1, currently under ...

Out of curiosity, I bought a strain gauge sensor module after it appeared on sale. This write-up is fuzzy, since I decided to write based on a quick inspection of it. Have fun reading my little post ...