RA2L2 low-power MCUs are the industry’s first MCU to support USB-C Revision 2.4 with 15W CC detection, USB FS, CAN, I3C, and low-power UART.

Elecrow hit Kickstarter with an electronics learning lab-in-a-box based around the Raspberry Pi. A 2nd generation crammed the lab into a laptop form factor. The CrowPi 3 "playground for programming, ...

Plug the RFID module into the breadboard with enough space around it. Connect the VCC pin to the Arduino's 3.3V (not 5V), and GND to the ground rail. For the data connections, wire SDA to Pin 10, SCK ...

Hi, I'm Bill. I'm a software developer with a passion for making and electronics. I do a lot of things and here is where I ...

Run in the Arduino IDE the HelloWorld example with an ili9488 in SPI. In fact, you don't need an ili display to try this, because it fails at compile time. The possible wiring errors, are irrelevant ...

There is also a numerical LCD panel meter, and three LEDs provide some status ... as Master and Minion both start with “M”. As an example, on a SPI bus, MISO (Master In Slave Out) and MOSI (Master Out ...

The display driver (ST7789V2) and touch controller (CST816T) are integrated on-board and rely on SPI and I2C interfaces that make it compatible with popular platforms such as Raspberry Pi, Arduino, ...

Recap – the original code uses an Arduino (C++ ... the first article with I2C as an example, as it’s hard to screw that up. For interfaces like SPI, speed can be a problem.

Alternately, you can find a temporized one with a countdown timer LCD ... examples. In future articles, we'll explore programming Arduino devices, shields, and busses such as I2C and SPI, and ...

In this STM32 SPI Example, we will use Arduino UNO as Slave and STM32F103C8 as Master with Two 16X2 LCD display attached to each other separately. Two Potentiometers are also connected with STM32 (PA0 ...

A new fully featured Arduino development board has been created called the Prestissimo Uno+ which is now available to back via Kickstarter with earlybird pledges available from just $20 ...