Yes I have :-) I Used a CUI AMT10E encoder with 4*5120 = 20480 pulses per revolution in quadrature mode. Sure not as precise as if you directly mount it to the motor, but I was pretty happy with ...

Said to be unique in design, the SKM 36 SinCos servo-motor feedback system with HIPERFACE interface includes a gearbox with only three stages of operation, compared with five ...

Building a 3D motor printed motor is one thing, but creating a completely custom servo motor with encoder requires some significant engineering. In the video after the break [365 Robots] takes us ...

For example, a motor with a torque of 2.3 N m at 500 rpm when used with a 3:1 gearbox will have a 6.9 N m output, but the motor’s rpm will climb to 1,500 rpm to drive the gearbox.

With its larger diameter motor and 50:1 ratio gear unit, this compact 158 mm diameter x 100.5 mm long housing features a 20 mm diameter through hole. Both models are IP65 sealed with waterproof ...

In this little robotic arm demo, a typical servo drive solution for a robot arm would require 12 to 14 wires per axis of motor. With CANopen, we only require four. We really simplify the cable ...

The 1FK7 servo motor from Siemens is developed with field-replaceable encoders that make for quick and easy on-site service with no special tools or recalibration required.

Targeting brush motors running at less than 100W with quadrature encoders, the 3C20 digital-motion controller claims a 32-bit or greater precision in position, velocity and acceleration, and jerk ...

The SICK EES37/EEM37 absolute encoders provide servo motor feedback with 15 or 17 bit resolution for Hiperface DSL®-enabled drives. The development has delivered digital data output and diagnostics ...