Hi, I'm Bill. I'm a software developer with a passion for making and electronics. I do a lot of things and here is where I document my learning in order to be able to inspire other people to make ...

The Arduino Nano Connector Carrier is a compact add-on board designed for the Arduino Nano boards to allow easy connection to ...

The Raspberry Pi is a credit card-sized computer capable of running full-fledged Linux distributions such as Raspberry Pi OS, ...

Can be used with Arduino or plain ESP-IDF. Driver inputs DMX using UART2 on GPIO pin 16. Feel free to experiment with other UARTs and Pins. Driver outputs DMX using UART2 on GPIO pin 17. Feel free to ...

mathrm {1\,dB}}}$ of 15.7 dBm and a receiver-mode noise figure (NF) of 4.1 dB are achieved. The eight-element transceiver modules developed in this work are capable of scanning the beam from −50° to ...

Those include USB Type-A and Type-C ports, an RS485 interface, a STAMP pad to connect an LTE Cat M/NB-IoT or LoRaWAN module, and expansion connectors including a Grove module, a 30-pin M5Bus header, ...

When VM 8-8 modules are used, the cable segments in a structured wiring system do not need to be laid out again. This reduces the expenses for alterations and the overall costs to a minimum. Depending ...

Therefore, this paper designs a photovoltaic data transmission network connection method based on a trusted module, adding a behavioral analysis layer on the basis of the traditional three-layer ...

This library provides a simple device independent interface for interacting with Adafruit IO using Arduino. It allows you to switch between WiFi (ESP8266, ESP32, ESP32-S2, ESP32-S3, ESP32-C3, RP2040, ...