PWM pins work the same way across all Arduino boards, so you don't need to go out of your way to buy a Mega if you already have a board supporting PWM. On the Uno, Nano, and Mini, the PWM pins are ...

But, the Arduino developers (Wiring maybe, this is old stuff) could easily have solved this in a much more efficient way by simply using the inverted Fast PWM mode instead of non-inverted.

The Atmega 328P chip in the Arduino Uno has three PWM timers (known as Timer 0, Timer 1, and Timer 2) controlling six PWM outputs. Each of the timers has a prescaler that generates the timer clock by ...

Here’s an Arduino library that will let you drive a very large number of LEDs. [Elco Jacobs], an electrical engineering student, is the author of the library. He has a work-study job that has… ...

Arduino Gemma from Adafruit is also based on the ATtiny85, and PB0 and PB1 appear to be accessible. This board has a USB connector for programming and a voltage regulator. This board, which I am ...

The Arduino Uno, operating with a 16-MHz clock, is programmed to use Timer0 to set up the PWM output OCRA at 244 Hz with the pulse-width set to 224/255 cycles. Figure 2 shows the waveforms when ...

Arduino can deliver high-speed PWM For a long time I have admired the pulse-with modulators designed into Atmel (now Microchip) AVR microcontrollers . The company was early into adding phase-locked ...

A new fully featured Arduino development board has been created called the Prestissimo Uno+ which is now available to back via Kickstarter with earlybird pledges available from just $20, AUS$28 or ...

A pulse-width-modulated (PWM) signal and the RC-charging characteristics of a weighted-capacitor network can be used along with a CMOS Schmitt inverter to generate a pulse whose width is linearly ...