Plug the RFID module into the breadboard with enough space around it. Connect the VCC pin to the Arduino's 3.3V (not 5V), and GND to the ground rail. For the data connections, wire SDA to Pin 10, SCK ...

The Alphanumeric LCD for Arduino will be our first circuit ... we need only three pins in our microcontroller. One pin is used for the serial data and the other two act like a clock to notify to the ...

Hi, I'm Bill. I'm a software developer with a passion for making and electronics. I do a lot of things and here is where I ...

To link a standard 16×2 LCD directly with the microcontroller, for instance Arduino, you would need atleast 6 I/O pins ... to buy an expensive I2C LCD for this task because readymade serial backpack ...

[Tobie’s] part of the hack is to use an Arduino and a few buttons as the controller. It’s easy to set up and we think the breadboarded controller approximates the size and weight of an LCD ...

This module will investigate creating an interactive side-scrolling game using an Arduino. It will also provide experience with advanced usage of the 16x2 LCD screen and its scrolling capabilities.

For the micro-controller part of the project I used an old Arduino Uno development board that had been collecting dust in a drawer and combined it with a £2.50 16×2 LCD screen I had previously ...