From the DSP to the FPGA, the VPBE provides a 24-bit parallel RGB interface also running at up to 75 MHz. Both the VPFE and VPBE are ideal interfaces for passing digital video data between the DM6437 ...

Signal communication and bidirectional data transfers between the DSP and FPGA is accomplished through the DSP's EMIFA interface. On the DSP side, the FPGA acts as a 32-bit synchronous memory in the ...

Current FPGA-side implementation is designed for Sipeed Tang chips and the GOWIN toolchain, but it should be portable to an open-source toolchain in the future.

The modem example system utilizes SOPC Builder to integrate the DSP Builder transmit dataflow co-processor with the TI EMIF interface. When SOPC Builder executes, it creates the hardware for the ...

Electronic designers and hardware hackers may be interested in a new USB2IO high-speed interface explorer tool combines the Intel Cyclone 10 FPGA and STM32H7 MCU. The STM32 microcontroller handles ...

Unfortunately, the traditional DSP-FPGA design flow requires designers to manually create RTL models and simulation testbenches from the DSP design.

In this paper, the authors described a complete design of parallel interface based on ARM & FPGA, using the on-chip DPRAM in FPGA to improve the metastability problem which was generated during ...

Lattice Semiconductor has introduced its LatticeECP2 and LatticeECP2M FPGA interface reference design supporting the Texas Instruments’ ADS6000 family of analogue-to-digital converters (ADCs). The ...

The D.Module2 standard allows stacking of modules so both an FPGA and a DSP module can be used for processing data for the same application. According to the supplier, the D.Module2 DSP board ...

For use in DSP-, FPGA-, and MCU-based systems, the CMX7861 analog front end combines codec, embedded signal processing, and auxiliary system support for interfacing between analog and digital systems.

Perhaps the FPGA will be called upon to create an ad hoc bridge for proprietary audio or video data buses in the system. FPGAs can be used to increase the capabilities of the DSP processor by ...