After all, the Arduino isn’t actually measuring the CPU speed, nor is it directly controlling it (that’s still done by the original Turbo button wiring). But the truth is, even back in the day ...

Plug the RFID module into the breadboard with enough space around it. Connect the VCC pin to the Arduino's 3.3V (not 5V), and GND to the ground rail. For the data connections, wire SDA to Pin 10, SCK ...

The button states could easily be read by using an Arduino’s analog input. A Pro Mini model was chosen for its small size as it could be housed in the radio compartment of the dash. The next ...

You can read the state of a button using Arduino and a few lines of code. The actual state is shown in the Serial Monitor window as 0 or 1, 0 meaning the button is not pressed and 1 that the button is ...

It's free to download, and you don't even need an Arduino board on standby to install it. Click the Start button in the bottom-right of the page. Click the Download button. Let the download run ...

so I built her a "Button Box" based around an Arduino. Open source, hackable, and made by hand. This post is just a quick summary - I'll be doing a much more in depth blog post about it at some ...

Did you know that you can use Arduino to turn on an LED when you press a button? Well, it is true, you can do this! Leaving the joke aside, let me show how you can achieve this. You will need the ...

and a set of three buttons. To help keep things organized, all of the components, including the Arduino, can be attached to a baseplate using included screws. The Arduino Plug and Make Kit ...

Created by the Lenka Design Workshop the case has been created using a 32×32 LEGO baseplate finished with a clear acrylic cover to house the four large arcade buttons and Arduino board ...

next to the Verify button, the IDE uploads the compiled binary program into the Arduino on the port you specified. The Arduino microcontroller takes over from there and executes your code on the ...