In this paper, we use the Arduino platform together with sensors as accelerometer, gyroscope and ultrasound, to measure vibrations in mechanical systems. The main objective is to assemble a signals ...

Aside from the USB port, you can power your Arduino boards with any regular battery connected to its VIN pin. The supply voltage depends on the board, but the more popular ones use 9V. In contrast ...

This project is based on MPU6050 accelerometer ... pin D11 of Arduino Nano and pin 3 to +9V. Pin 4 (ANT) is connected to an antenna for long-distance transmission. Software. Arduino IDE is used for ...

It is very easy to write a code on the Arduino board and integrate an ultrasonic sensor to carry out this task. But in this article, we are going to adopt a different approach. We are going to use ...

Except for one difference below, connect the Bluetooth module to the Arduino per your wiring diagram (BlueSMiRF wiring diagram). DIFFERENCE: Use pins 0 and 1 instead of 2 and 3: The Bluetooth TX ...

This is accomplished by using capacitors (refer image), as the Accel ... for Accelerometer from the front and back side along with the pin description- Circuit Diagram for Arduino Accelerometer Step ...

The connections of the holes are shown in the diagram below ... Connect the RS and E pin of the LCD module to the pin2 and pin3 of the Arduino board respectively. The RW pin of the LCD is connected to ...

The concept behind this Wireless 3D Air Mouse is very simple, we will use an accelerometer to get the value of ... of software serial and set up the pins for Tx and Rx. In Arduino Nano and Uno Pin 2 ...