Conair''s Churchill water and oil circulating temperature control family has been expanded with new designs and better economies. Stainless steel tank 9kW and 18kW TC90 water units now have a negative ...

During the test, mold temperature readings for both units were taken at one-minute intervals, using a surface pyrometer placed at the center of each mold surface. The temperature of the water-based ...

Thermolator® temperature control units from Conair help manufacturers ... exchanging it with lower temperature water through ... controller, and a cooling valve to control water flow ...

A temperature control unit offers pumping rates of 90, 150, or 200 gal/min, using 50- to 200-kW heaters, heat exchangers from 3.9-21 ft2, and a temperature range up to 550°F. The 6017?s ...

The tank controller can control and stage Envision NSW and NDW water-to-water units and Synergy3D products. A sensor built into geothermal storage tanks enables this flexible module to control water ...

The Aquanta Smart Water Heater Controller installed on a 40-gallon propane water heater. Four control options An Aquanta controller costs $149 and you can install it yourself in about 20 minutes.

The Regloplas P230S pressurized water temperature control unit can heat pressurized water up to 446° F. Because the water is under high pressure, it remains liquid and does not turn to steam.

Adjusting the water temperature requires adjusting a screw on the relay. It is an open loop, hit-or-miss operation. Instead of using a thermal relay, the same controller managing the capacitive sensor ...

Simulations revealed that the annual energy-saving efficiency of the CV-ASHP system is 12.00%, the VC-ASHP system is 13.11% and the VV-ASHP system is 24.13%. The energy-saving efficiency of the ...