This is tutorial number 1 from our series of Arduino tutorials and in this part I will talk about blinking an LED using the one already available on the Arduino Uno board or using an external LED to ...

Home » Feature Story » Apps » Blinking an LED with the Arduino IDE. ... Open the LED blink example sketch: File > Examples > 1.Basics > Blink. You should see a window like in Figure 2. 3.

The 1K resistors are used for base current limiting, and the 390R resistors limits the operating current of the LED display segments. In the Arduino board, digital outputs from D2 to D8 are used to ...

The Julia programming language is a horrible fit for a no-frills microcontroller like the ATMega328p that lies within the classic Arduino, but that didn’t stop [Sukera] from trying, and succe… ...

As a perfect example, these LED “blinking eyes” were created by [Will Moser]. Using nothing more exotic than some bare LEDs, an Arduino, and a cardboard box, ...

A Light Emitting Diode (LED) should light up once the Arduino has power and after a second or so, an LED on the board should start slowly blinking. The image below points out these LEDs on the board.

If you're looking for a fun electronics project to give a small fright to trick-or-treaters you can create a spooky blinking eyes setup where several sets of colored eyes blink randomly by ...